Neler yeni

qwebirc Kurulumu !

  • Konbuyu başlatan Jigsaw
  • Başlangıç tarihi
J

Jigsaw

Linux qwebirc Kurulumu ve Ayarları Cliaweb Alıntıdır

qwebirc kısaca mevcut irc sunucunuzu mobil ziyaretçilere açan, web üzerinden mobil cihaz kullananların kolayca etkileşimde bulunmasını sağlayan bir eklentidir diyebiliriz. qwebirc config.py de belirteceğiniz irc sunucusu ile mobil ziyaretçileriniz arasında bir köprüdür.
qwebirc Kurulumu İçin Gerekenler ;

PHP:
python (2.5 üzeri olmalıdır).
python-twisted, python-twisted-bin, python-twisted-core, python-twisted-runner, python-twisted-names, python-twisted-mail, python-twisted-words ve python-twisted-web (Twisted 8.2.0).
python-zope.interface (8.2.0)
mercurial
openjdk-6
opsiyonel SSL desteği : python-openssl
Aşağıdaki kurulum komutlarını işletim sisteminizin türüne göre çalıştırın. Örneğin biz Centos işletim sisteminde kurulum gerçekleştirdiğimiz için centos / rhel komutlarını çalıştırıyoruz ;

Centos / RHEL / Fedora için ;

PHP:
sudo yum install epel-release
sudo yum -y install python-twisted
sudo yum -y install mercurial
sudo yum install java-1.6.0-openjdk-devel
sudo yum -y install libffi-devel
sudo yum -y install openssl-devel
sudo yum -y install python-devel
sudo yum -y install python-pip
Gerekebilir (ssl erişimlerinde) ;

PHP:
sudo pip install pyopenssl --upgrade
Ubuntu / Debian için ;

PHP:
hg clone https://bitbucket.org/qwebirc/qwebirc
cd qwebirc
mv config.py.example config.py
nano -w config.py
Düzenlenmesi gereken örnek config.py kısımları ;

PHP:
IRCSERVER, IRCPORT = "irckuruluolansunucuipadresi", 6667
REALNAME = "http://webchat.irc.cliaweb.com/"
IDENT = "webchat"
OUTGOING_IP = "127.0.0.1"
WEBIRC_MODE = "webirc"
WEBIRC_PASSWORD = "ŞİFRE"
CGIIRC_STRING = "CGIIRC"
BASE_URL = "http://webchat.irc.chatforumlari.com/"
Örnek config.py dosyası ;

PHP:
# qwebirc configuration file
#
# This a Python program that is imported, so feel free to use any
# Python here!
#
# Note that some changes to this configuration file require re-running
# compile.py and others require restarting qwebirc (and some require
# both!)
# If in doubt always re-compile and restart.

# The following line is required, don't remove it!
from qwebirc.config_options import *

# IRC OPTIONS
# ---------------------------------------------------------------------
#
# OPTION: IRCSERVER
#         Hostname (or IP address) of IRC server to connect to.
# OPTION: IRCPORT
#         Port of IRC server to connect to.
IRCSERVER, IRCPORT = "37.123.101.155", 6667

# OPTION: SSLPORT
#         SSL port of IRC server to connect to.
#         If this option is uncommented it will override IRCPORT.
#SSLPORT = 6697

# OPTION: REALNAME
#         The realname field of IRC clients will be set to this value.
REALNAME = "http://moo.com/"

# OPTION: IDENT
#        ident to use on irc, possible values include:
#        - a string, e.g. IDENT = "webchat"
#        - the literal value IDENT_HEX, this will set the ident to the
#          a hexadecimal version of the users IP address, e.g
#          IDENT = IDENT_HEX
#        - the literal value IDENT_NICKNAME, this will use the users
#          supplied nickname as their ident.
IDENT = "webchat"

# OPTION: OUTGOING_IP
#         The IP address to bind to when connecting to the IRC server.
#
#         This will not change the IP address that qwebirc listens on. 
#         You will need to call run.py with the --ip/-i option if you 
#         want that.
#OUTGOING_IP = "127.0.0.1"

# OPTION: WEBIRC_MODE
#         This option controls how the IP/hostname of the connecting
#         browser will be sent to IRC.
#
#         Possible values include:
#         - the string "webirc", i.e. WEBIRC_MODE = "webirc"
#           Use WEBIRC type blocks, with a server configuration of
#           the following style:
#
#           cgiirc {
#             type webirc;
#             hostname <qwebirc's ip address>;
#             password <password>;
#           };
#
#           Remember to set the WEBIRC_PASSWORD value to be the
#           same as <password>.
#         - the string "cgiirc", i.e. WEBIRC_MODE = "cgiirc"
#           old style CGIIRC command, set CGIIRC_STRING to be the
#           command used to set the ip/hostname, and set
#           WEBIRC_PASSWORD to be the password used in the server's
#           configuration file.
#         - the literal value None, i.e. WEBIRC_MODE = None
#           Send the IP and hostname in the realname field, overrides
#          the REALNAME option.
WEBIRC_MODE = None

# OPTION: WEBIRC_PASSWORD
#         Used for WEBIRC_MODE webirc and cgiirc, see WEBIRC_MODE
#         option documentation.
#WEBIRC_PASSWORD = "fish"

# OPTION: CGIIRC_STRING
#         Command sent to IRC server in for cgiirc WEBIRC_MODE.
#         See WEBIRC_MODE option documentation.
#CGIIRC_STRING = "CGIIRC"

# UI OPTIONS
# ---------------------------------------------------------------------
#
# OPTION: BASE_URL
#         URL that this qwebirc instance will be available at, add the
#         port number if your instance runs on a port other than 80.
BASE_URL = "http://cliaweb.com/"

# OPTION: NETWORK_NAME
#         The name of your IRC network, displayed throughout the
#         application.
NETWORK_NAME = "CliaWeb Hosting"

# OPTION: ANALYTICS_HTML
#         If you have an analytics service, you can paste the HTML
#         between the triple quotes.
#ANALYTICS_HTML = """
#"""

# OPTION: APP_TITLE
#         The title of the application in the web browser.
APP_TITLE = NETWORK_NAME + " Web IRC"

# NICKNAME VALIDATION OPTIONS
# ---------------------------------------------------------------------
#
# OPTION: NICKNAME_VALIDATE
#         If True then user nicknames will be validated according to
#         the configuration below, otherwise they will be passed
#         directly to the ircd.
NICKNAME_VALIDATE = True

# OPTION: NICKNAME_VALID_FIRST_CHAR
#         A string containing valid characters for the first letter of
#         a nickname.
#         Default is as in RFC1459.
import string
NICKNAME_VALID_FIRST_CHAR = string.letters + "_[]{}`^\\|"

# OPTION: NICKNAME_VALID_SUBSEQUENT_CHAR
#         A string containing valid characters for the rest of the
#         nickname.
NICKNAME_VALID_SUBSEQUENT_CHARS = NICKNAME_VALID_FIRST_CHAR + string.digits + "-"

# OPTION: NICKNAME_MINIMUM_LENGTH
#         Minimum characters permitted in a nickname on your network.
NICKNAME_MINIMUM_LENGTH = 2

# OPTION: NICKNAME_MAXIMUM_LENGTH
#         Maximum characters permitted in a nickname on your network.
#         Ideally we'd extract this from the ircd, but we need to know
#         before we connect.
NICKNAME_MAXIMUM_LENGTH = 15

# FEEDBACK OPTIONS
# ---------------------------------------------------------------------
#
# These options control the feedback module, which allows users to
# send feedback directly from qwebirc (via email).
#
# OPTION: FEEDBACK_FROM
#         E-mail address that feedback will originate from.
FEEDBACK_FROM = "moo@moo.com"

# OPTION: FEEDBACK_TO:
#         E-mail address that feedback will be sent to.
FEEDBACK_TO = "moo@moo.com"

# OPTION: FEEDBACK_SMTP_HOST
#         Hostname/IP address of SMTP server feedback will be sent
#         through.
# OPTION: FEEDBACK_SMTP_PORT
#         Port of SMTP server feedback will be sent through.
FEEDBACK_SMTP_HOST, FEEDBACK_SMTP_PORT = "127.0.0.1", 25

# ADMIN ENGINE OPTIONS
# ---------------------------------------------------------------------
#
# OPTION: ADMIN_ENGINE_HOSTS:
#         List of IP addresses to allow onto the admin engine at
#         http://instance/adminengine
ADMIN_ENGINE_HOSTS = ["127.0.0.1"]

# PROXY OPTIONS
# ---------------------------------------------------------------------
#
# OPTION: FORWARDED_FOR_HEADER
#         If you're using a proxy that passes through a forwarded-for
#         header set this option to the header name, also set
#         FORWARDED_FOR_IPS.
#FORWARDED_FOR_HEADER="x-forwarded-for"
 
# OPTION: FORWARDED_FOR_IPS
#         This option specifies the IP addresses that forwarded-for
#         headers will be accepted from.
#FORWARDED_FOR_IPS=["127.0.0.1"]

# EXECUTION OPTIONS
# ---------------------------------------------------------------------
#
# OPTION: ARGS (optional)
#         These arguments will be used as if qwebirc was run directly
#         with them, see run.py --help for a list of options.
#ARGS = "-n -p 3989"

# OPTION: SYSLOG_ADDR (optional)
#         Used in conjunction with util/syslog.py and -s option.
#         This option specifies the address and port that syslog
#         datagrams will be sent to.
#SYSLOG_ADDR = "127.0.0.1", 514

# TUNEABLE VALUES
# ---------------------------------------------------------------------
#
# You probably don't want to fiddle with these unless you really know
# what you're doing...

# OPTION: UPDATE_FREQ
#         Maximum rate (in seconds) at which updates will be propagated
#         to clients
UPDATE_FREQ = 0.5

# OPTION: MAXBUFLEN
#         Maximum client AJAX recieve buffer size (in bytes), if this
#         buffer size is exceeded then the client will be disconnected.
#         This value should match the client sendq size in your ircd's
#         configuration.
MAXBUFLEN = 100000

# OPTION: MAXSUBSCRIPTIONS
#         Maximum amount of 'subscriptions' to a specific AJAX channel,
#         i.e. an IRC connection.
#         In theory with a value greater than one you can connect more
#         than one web IRC client to the same IRC connection, ala
#         irssi-proxy.
MAXSUBSCRIPTIONS = 1

# OPTION: MAXLINELEN
#         If the client sends a line greater than MAXLINELEN (in bytes)
#         then they will be disconnected.
#         Note that IRC normally silently drops messages >=512 bytes.
MAXLINELEN = 600

# OPTION: DNS_TIMEOUT
#         DNS requests that do not respond within DNS_TIMEOUT seconds
#         will be cancelled.
DNS_TIMEOUT = 5

# OPTION: HTTP_AJAX_REQUEST_TIMEOUT
#         Connections made to the AJAX engine are closed after this
#         this many seconds.
#         Note that this value is intimately linked with the client
#         AJAX code at this time, changing it will result in bad
#         things happening.
HTTP_AJAX_REQUEST_TIMEOUT = 30

# OPTION: HTTP_REQUEST_TIMEOUT
#         Connections made to everything but the AJAX engine will
#         be closed after this many seconds, including connections
#         that haven't started/completed an HTTP request.
HTTP_REQUEST_TIMEOUT = 5

# OPTION: STATIC_BASE_URL
#         This value is used to build the URL for all static HTTP
#         requests.
#         You'd find this useful if you're running multiple qwebirc
#         instances on the same host.
STATIC_BASE_URL = ""

# OPTION: DYNAMIC_BASE_URL
#         This value is used to build the URL for all dynamic HTTP
#         requests.
#         You'd find this useful if you're running multiple qwebirc
#         instances on the same host.
DYNAMIC_BASE_URL = ""

# OPTION: CONNECTION_RESOLVER
#         A list of (ip, port) tuples of resolvers to use for looking
#         the SRV record(s) used for connecting to the name set in
#         IRC_SERVER.
#         The default value is None, and in this case qwebirc will use
#         the system's default resolver(s).
CONNECTION_RESOLVER = None

# OPTION: HELP_URL
#         Shown to the user if they type /HELP or click on the Help!
#         option in the user interface.
HELP_URL = ""

# QUAKENET SPECIFIC VALUES
# ---------------------------------------------------------------------
#
# These values are of no interest if you're not QuakeNet.
# At present they still need to be set, this will change soon.
#
# OPTION: HMACKEY
#         Shared key to use with hmac WEBIRC_MODE.
HMACKEY = "mrmoo"

# OPTION: HMACTEMPORAL
#         Divisor used for modulo HMAC timestamp generation.
HMACTEMPORAL = 30

# OPTION: AUTHGATEDOMAIN
#         Domain accepted inside authgate tickets.
AUTHGATEDOMAIN = "webchat_test"

# OPTION: QTICKETKEY
#         Key shared with the authgate that is used to decrypt
#         qtickets.
QTICKETKEY = "boo"

# OPTION: AUTH_SERVICE
#         Service that auth commands are sent to. Also used to check
#         responses from said service.
AUTH_SERVICE = "Q!TheQBot@CServe.quakenet.org"

# OPTION: AUTH_OK_REGEX
#         JavaScript regular expression that should match when
#         AUTH_SERVICE has returned an acceptable response to
#         authentication.
AUTH_OK_REGEX = "^You are now logged in as [^ ]+\\.$"

# OPTION: AUTHGATEPROVIDER
#         Authgate module to use, normally imported directly.
#         dummyauthgate does nothing.
import dummyauthgate as AUTHGATEPROVIDER
9090 portunu açıyoruz (centos,rhel,fedora için) ;
PHP:
service iptables stop
iptables -A INPUT -p tcp --dport 9090 -j ACCEPT
service iptables save
service iptables start
Ardından compile ederek qwebirc başlatıyoruz ;

PHP:
./compile.py
./run.py
Web üzerinden veya mobilden erişiyoruz ; http://sunucuipadresi:9090/
 
Üst